pogoplug E02 prompt "ERROR: can't get kernel image!", please help!
Hi, all my target is pogoplug E02. After i run http://jeff.doozan.com/debian/uboot/install_uboot_mtd0.sh, and select option n - to keep original Pogoplug software . then i try to format and label...
View ArticleRe: pogoplug E02 prompt "ERROR: can't get kernel image!", please help!
update some info, previously i follow the steps in this page http://blog.qnology.com/2013/03/tutorial-pogoplug-e02-with-arch-linux.html?showComment=1439781864560#c734884235715806540, the person give...
View ArticleRe: pogoplug E02 prompt "ERROR: can't get kernel image!", please help!
doomgiant, Since you have installed u-boot successfully using Jeff's script. You can just create a basic working Debian rootfs. Ttry the Debian-3.16.0-kirkwood-tld-2 rootfs:...
View ArticleRe: pogoplug E02 prompt "ERROR: can't get kernel image!", please help!
Many thanks, Bodhi. It works now!!! That's great!!! Could you help to show how to update error kernal image in debian?Sorry i am not familar with it. Or is it possible to make original pogoplug system...
View ArticleRe: pogoplug E02 prompt "ERROR: can't get kernel image!", please help!
doomgiant, > Could you help to show how to update error kernal > image in debian?Sorry i am not familar with it. Or > is it possible to make original pogoplug system > work again? That...
View ArticleRe: pogoplug E02 prompt "ERROR: can't get kernel image!", please help!
Many thanks. Please check below root@debian:~# fw_printenv ethact=egiga0 bootdelay=3 baudrate=115200 arcNumber=2097 mainlineLinux=yes console=ttyS0,115200 led_init=green blinking led_exit=green off...
View ArticleRe: pogoplug E02 prompt "ERROR: can't get kernel image!", please help!
doomgiant, So now when you boot without the USB drive, what does serial console output looks like?
View ArticleRe: pogoplug E02 prompt "ERROR: can't get kernel image!", please help!
Sorry for the missing log. without the usb drive, it display as below and can't get the ip address U-Boot 2011.12 (Feb 20 2012 - 21:21:59) Pogoplug E02 SoC: Kirkwood 88F6281_A0 DRAM: 256 MiB WARNING:...
View ArticleRe: pogoplug E02 prompt "ERROR: can't get kernel image!", please help!
doomgiant, Everthing looks normal. Except that the stock kernel could not start. I believe this is likely the problem that restamp and I solved a few months ago, and I uploaded a new Pogo E02 u-boot...
View ArticleRe: pogoplug E02 prompt "ERROR: can't get kernel image!", please help!
bodhi, Many thanks for your detail explanation, it has been a great progress to make it work with Debian. Thanks again! And does it mean this boot issue can be fixed on 2014.07 U-Boot?
View ArticleRe: pogoplug E02 prompt "ERROR: can't get kernel image!", please help!
doomgiant Wrote: ------------------------------------------------------- > bodhi, > > Many thanks for your detail explanation, it has > been a great progress to make it work with >...
View ArticleRe: pogoplug E02 prompt "ERROR: can't get kernel image!", please help!
Got it. Many thanks for your help!
View ArticleRe: pogoplug E02 prompt "ERROR: can't get kernel image!", please help!
hi, bodhi I found one strange thing , after flash Debian-3.16.0-kirkwood-tld-2 rootfs: http://forum.doozan.com/read.php?2,12096 on each boot to debian, mac address of the ethernet is different , is it...
View ArticleRe: pogoplug E02 prompt "ERROR: can't get kernel image!", please help!
doomgiant Wrote: ------------------------------------------------------- > hi, bodhi > > I found one strange thing , after flash > Debian-3.16.0-kirkwood-tld-2 rootfs: >...
View ArticleRe: pogoplug E02 prompt "ERROR: can't get kernel image!", please help!
Hi, bodhi No, I haven't done it. I couldn't find the command about it. Can you help to describe how to do it? Many thanks!
View ArticleRe: pogoplug E02 prompt "ERROR: can't get kernel image!", please help!
In Debian, fw_setenv ethaddr xx:xx:xx:xx:xx
View ArticleRe: pogoplug E02 prompt "ERROR: can't get kernel image!", please help!
It works! Thanks again!
View ArticleRe: pogoplug E02 prompt "ERROR: can't get kernel image!", please help!
I had installed Jeff's uboot to install arch linux and debian wheezy. Couple of days back, I found your new uboot for Debian Jessie and updated my Pogoplug E02 using...
View ArticleRe: pogoplug E02 prompt "ERROR: can't get kernel image!", please help!
bla9, > I did backup mtd0 and current_envs.txt before i > updated uboot. > Very good! The new u-boot does not have setup to boot Pog OS. That's not the goal. However, it is possible that you...
View ArticleRe: pogoplug E02 prompt "ERROR: can't get kernel image!", please help!
Thank you Bodhi. I may have missed the statement that new u-boot was not setup to boot pogo OS. I thought I had done something wrong while updating. If it is not much trouble and beneficial, I have...
View ArticleRe: pogoplug E02 prompt "ERROR: can't get kernel image!", please help!
bla9, Boot and interrupt serial console, setenv pogo_bootcmd 'if fsload uboot-original-mtd0.kwb; then go 0x800200; fi' run pogo_bootcmd See if it boots back into Pogo OS. --------------- OT note: for...
View ArticleRe: pogoplug E02 prompt "ERROR: can't get kernel image!", please help!
Thank you very much Bodhi. I was able to boot PogoOS with your commands. Please see logs below. It is good to learn and understand it a little better. I appreciate your time and help. Environment...
View ArticleRe: pogoplug E02 prompt "ERROR: can't get kernel image!", please help!
bla9, Cool! so you can try to unplug your USB rootfs and let it boot automatically. Interrupt serial console and setenv pogo_bootcmd 'if fsload uboot-original-mtd0.kwb; then go 0x800200; fi' setenv...
View ArticleRe: pogoplug E02 prompt "ERROR: can't get kernel image!", please help!
Also, arcNumber should be 3542 so that it identifies Pogoplug E02 correctly. arcNumber 2097 will work but the LED behavior will not be correct.
View ArticleRe: pogoplug E02 prompt "ERROR: can't get kernel image!", please help!
Hi bodhi, I was able to follow all the steps above and successfully boot into Pogo OS when there are no USB attached. Also, I updated the arcNumber to 3542. Debian Jessie has been running smooth for...
View Article